Subaru Legacy 2002 Service Manual page 2117

VDC
B: INSTALLATION
1. HYDRAULIC UNIT (H/U)
1) Install hydraulic unit.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
2) Connect hydraulic unit ground cable to body.
Tightening torque:
33 N·m (3.4 kgf-m, 25 ft-lb)
3) Connect brake pipes to their correct hydraulic
unit connections.
4) Secure hydraulic unit connector to connector
bracket.
CAUTION:
Align connector with mating receptacle.
5) Connect connector to hydraulic unit.
(1) Relay box connector
(2) Hydraulic unit connector
6) Install air intake duct.
7) Connect ground cable to battery.
8) Bleed air from the brake system.
HYDRAULIC CONTROL UNIT (H/U)
S402551A11
S402551A1101
B4M1913
B4M1917B
VDC-12
2. RELAY BOX
S402551A1102
1) Install relay box and connector bracket.
Tightening torque:
13 N·m (1.3 kgf-m, 9.4 ft-lb)
2) Secure relay box connector to connector
bracket.
CAUTION:
Align connector with mating receptacle.
3) Connect connector to relay box.
(1) Relay box connector
(2) Hydraulic unit connector
4) Install air intake duct.
5) Connect ground cable to battery.
B4M1914
B4M1917B