Rear Stabilizer - Subaru Legacy 2002 Service Manual

Hide thumbs Also See for Legacy 2002:

Table of Contents

3. Rear Stabilizer

1) Jack-up the rear part of the vehicle, support it

with safety stands (rigid racks).

2) Remove bolts which secure stabilizer link to

3) Remove bolts which secure stabilizer to sub

B: INSTALLATION

Install in the reverse order of removal.

Ensure that bushing and stabilizer have the same

identification colors when installing.

Discard old self-locking nut and replace with a

Tightening torque:

Stabilizer link to rear arm

44 N·m (4.5 kgf-m, 32.5 ft-lb)

Clamp to sub frame

40 N·m (4.1 kgf-m, 30 ft-lb)

C: INSPECTION

1) Check bushing for cracks, fatigue or damage.

2) Check stabilizer links for deformities, cracks, or

damage, and bushing for protrusions from the hole

of stabilizer link.

REAR STABILIZER

Rear Suspension

Table of Contents