Mt Gear Shift Lever - Subaru Legacy 2002 Service Manual

4. MT Gear Shift Lever

A: REMOVAL
S501236A18
1) Set the vehicle on a lift.
2) Remove gear shift knob.
3) Remove console
REMOVAL, Console Box.>
4) Remove boot plate from body.
5) Lift-up the vehicle.
6) Remove rear exhaust pipe and muffler.
Except 3.0 L model
<Ref. to EX(w/oOBD)-13,
Exhaust Pipe.> and <Ref. to EX(w/oOBD)-14,
REMOVAL, Muffler.> or <Ref. to EX-9, REMOVAL,
Rear Exhaust Pipe.> and <Ref. to EX-10,
REMOVAL, Muffler.>
3.0 L model
<Ref. to EX(H6)-5, REMOVAL, Front Exhaust
Pipe.> and <Ref. to EX(H6)-8, REMOVAL, Rear
Exhaust Pipe.> and <Ref. to EX(H6)-9, REMOVAL,
Muffler.>
7) Remove heat shield cover.
MT GEAR SHIFT LEVER
S501236
box. <Ref. to EI-34,
B3M1822
REMOVAL, Rear
B3M1605
8) Remove stay from transmission bracket.
(A) Stay
(B) Transmission bracket
9) Remove rod from joint.
(A) Stay
(B) Rod
10) Remove cushion rubber from body.
(A) Stay
(B) Cushion rubber
CS-13
Control Systems
B3M1823A
B3M1824A
B3M1825A