Subaru Legacy 2002 Service Manual page 1918

1. WHEEL ARCH HEIGHT
1) Set vehicle on a level surface.
2) Set vehicle to "curb weight" conditions. (Empty luggage compartment, install spare tire, jack, service
tools, and top up fuel tank.)
3) Set steering wheel in a straight line, then move the vehicle straight ahead more than 5 m (16 ft) to settle
the suspension.
4) Suspend thread from wheel arch (point "A" in figure below) to determine a point directly above center
of wheel.
5) Measure distance between measuring point "A" and center of wheel.
Model
Sedan
Wagon
OUTBACK
+12
* Model for Australia: 431
WHEEL ALIGNMENT
S202116A1006
Front
+12 +0.47
388 / mm (15.28
−24
+12 +0.47
388 / mm (15.28
−24
+12 +0.47
428 / mm (16.85
−24
+0.47
/ mm (16.97 / in)
−24 −0.94
Specified wheel arch height
/ in) 371
−0.94
/ in) 381
−0.94
/ in) 421
−0.94
FS-7
Front Suspension
Rear
+12 +0.47
/ mm (14.61 /
−24 −0.94
+12 +0.47
/ mm (15.00 /
−24 −0.94
+12 +0.47
/ mm (16.57 /
−24 −0.94
B4M1783A
in)
in)
in)*