Subaru Legacy 2002 Service Manual page 2450

DIAGNOSTICS CHART WITH SUBARU SELECT MONITOR
No.
21 CHECK POOR CONTACT IN CONNEC-
TORS.
Turn ignition switch to OFF.
22 CHECK ABSCM&H/U.
1) Connect all connectors.
2) Erase the memory.
3) Perform inspection mode.
4) Read out the DTC.
23 CHECK ANY OTHER DTC APPEARANCE.
Step
Is there poor contact in
connector between
ABSCM&H/U and G sen-
sor?
Is the same DTC as in the
current diagnosis still being
output?
Are other DTC being out-
put?
ABS-149
Check Yes
Repair connector.
Replace
ABSCM&H/U.
<Ref. to ABS-6,
ABS Control Mod-
ule and Hydraulic
Control Unit
(ABSCM&H/U).>
Proceed with the
diagnosis corre-
sponding to the
DTC.
ABS (Diagnostics)
No
Go to step 22.
Go to step 23.
A temporary poor
contact.