Subaru Legacy 2002 Service Manual page 1671

TRANSFER CASE AND EXTENSION CASE ASSEMBLY
Manual Transmission and Differential
16) Install extension assembly into transfer case.
Tightening torque:
40 N·m (4.1 kgf-m, 29.7 ft-lb)
17) Install shifter arm to transfer case.
18) Hang the shifter arm on the 3rd-4th fork rod.
19) Install transfer case with extension case
assembly to transmission case.
Tightening torque:
25 N·m (2.5 kgf-m, 18.1 ft-lb)
C: DISASSEMBLY
1. TRANSFER CASE
1) Remove reverse check assembly. <Ref. to
MT-53, REMOVAL, Reverse Check Sleeve.>
2) Remove oil guide.
B3M1374
2. EXTENSION CASE
1) Remove transfer drive gear assembly. <Ref. to
MT-48, REMOVAL, Transfer Drive Gear.>
2) Remove shift bracket.
B3M1396
3) Remove oil seal from extension case. <Ref. to
MT-39, Oil Seal.>
B3M1397B
B3M1373
MT-46
S503561A06
S503561A0601
B3M1378
S503561A0602
B3M1381