Flywheel - Subaru Legacy 2002 Service Manual

3. Flywheel

S504250
A: REMOVAL
S504250A18
1. EUROPE AND AUSTRALIA MODELS
S504250A1803
1) Remove transmission assembly. <Ref. to
MT-31, REMOVAL, Manual Transmission Assem-
bly.>
2) Remove clutch cover and clutch disc. <Ref to
CL-12, REMOVAL, Clutch Disc and Cover.>
3) Remove flywheel using ST1 and ST2.
ST1 498497100 CRANKSHAFT STOPPER
ST2 499057000 TORX PLUS
(A) Flywheel
2. EXCEPT EUROPE AND AUSTRALIA
MODELS
S504250A1804
1) Remove transmission assembly. <Ref. to
MT-31, REMOVAL, Manual Transmission Assem-
bly.>
2) Remove clutch cover and clutch disc. <Ref. to
CL-12 REMOVAL, Clutch Disc and Cover.>
3) Using ST, remove flywheel.
ST 498497100 CRANKSHAFT STOPPER
(A) Flywheel
FLYWHEEL
B: INSTALLATION
1. EUROPE AND AUSTRALIA MODELS
S504250A1103
1) Install flywheel and ST.
ST 498497100 CRANKSHAFT STOPPER
2) Tighten the flywheel attaching bolts to the
specified torque.
ST 499057000 TORX PLUS
NOTE:
Tighten flywheel installing bolts gradually. Each
bolt should be tightened to the specified torque in
B2M3347B
a crisscross fashion.
Tightening torque:
72 N·m (7.3 kgf-m, 52.8 ft-lb)
3) Install clutch disc and cover. <Ref. to CL-12,
EUROPE
INSTALLATION, Clutch Disc and Cover.>
4) Install transmission assembly. <Ref. to MT-33,
INSTALLATION, Manual Transmission Assembly.>
B2M0332B
CL-17
S504250A11
AND AUSTRALIA
Clutch System
B2M3359A
B2M3360A
MODELS,