Transmission Control Module (Tcm) - Subaru Legacy 2002 Service Manual

19. Transmission Control
Module (TCM)
A: REMOVAL
S502225A18
1) Disconnect battery ground cable.
2) Remove lower cover and then disconnect con-
nector.
3) Disconnect connectors from transmission con-
trol module.
LHD model
(A) Transmission control module
(B) Brake pedal bracket

TRANSMISSION CONTROL MODULE (TCM)

S502225
G6M0095
B3M1591
B3M1592A
RHD model
(A) Transmission control module
(B) Column shaft
4) Remove transmission control module.
B: INSTALLATION
1) Install transmission control module.
Tightening torque:
LHD model
7.5 N·m (0.76 kgf-m, 5.5 ft-lb)
RHD model
25 N·m (2.5 kgf-m, 18.1 ft-lb)
LHD model
(A) Transmission control module
(B) Brake pedal bracket
RHD model
(A) Transmission control module
(B) Column shaft
2) Connect connectors to transmission control
module.
3) Install in the reverse order of removal.
AT-49
Automatic Transmission
B3M1593A
S502225A11
B3M1592A
B3M1648A