Subaru Legacy 2002 Service Manual page 1937

Rear Suspension
1. General Description
A: SPECIFICATIONS
Camber (Tolerance: ±0°30')
Toe-in
Kingpin angle
Rear
Wheel arch height
[Tolerance: +12/−24 mm (+0.47/−0.94 in)]
Diameter of stabilizer
NOTE:
¼ Front and rear toe-in and front camber can be
adjusted. If toe-in or camber tolerance exceeds
specifications, adjust toe-in and camber to the
middle value of specification.
¼ The other items indicated in the specification
table cannot be adjusted. If the other items exceed
specifications, check suspension parts and con-
nections for deformities; replace with new ones as
required.
(1) Front
A − B = Positive: Toe-in, Negative: Toe-out
α1, α2: Each toe-in angle
GENERAL DESCRIPTION
S201001
S201001E49
Model
B4M2250C
Sedan Wagon
2.0 L 2.0 L
−0°30' −0°20'
0±3 mm (0±0.12 in) Each toe angle: ±0°15'
14°15' 14°15'
371 mm 381 mm
(14.61 in) (14.99 in)
14 mm 15 mm
(0.55 in) (0.59 in)
RS-2
OUTBACK
2.5 L Except
Australia
−0°10'
13°30'
421 mm
(16.57 in)
14 mm 14 mm
(0.55 in) (0.55 in)
Australia
431 mm
(16.97 in)