Subaru Legacy 2002 Service Manual page 1753

Hide thumbs Also See for Legacy 2002:

Table of Contents

Clutch System

<Ref. to MT-33, INSTALLATION, Manual Trans-

mission Assembly.>

C: INSPECTION

1. RELEASE BEARING

Since this bearing is grease sealed and is of a

non-lubrication type, do not wash with gasoline or

any solvent when servicing the clutch.

1) Check the bearing for smooth movement by

applying force in the radial direction.

Radial direction stroke:

1.4 mm (0.055 in)

Bearing case

2) Check the bearing for smooth rotation by apply-

ing pressure in the thrust direction.

Bearing case

3) Check wear and damage of bearing case sur-

face contacting with lever.

RELEASE BEARING AND LEVER

S504251A1001

2. RELEASE LEVER

1) Check lever pivot portion and the point of con-

tact with release bearing case for wear.

Clutch release lever

Clutch release bearing

S504251A1002

Chapters

Table of Contents