Subaru Legacy 2002 Service Manual page 2264

22) While fixing 2-surface width, pull out oil seal by
rotating nut.
(1) 2-surface width
(2) Nut
STEERING GEARBOX [RHD MODEL]
B4M2608A
PS-55
Power Assisted System (Power Steering)
D: ASSEMBLY
S601276A02
Specified steering grease:
VALIANT GREASE M2 (Part No.
003608001)
1) Apply grease inside and outside of oil seal and
press in using ST and press.
ST 34199AE130 GEARBOX OIL SEAL
INSTALLER
CAUTION:
Pay attention to oil seal direction, and attach-
ing position.
Be careful no to scratch gearbox inside sur-
face.
(1) Oil seal
2) Attach steering body to ST as shown. Apply a
coat of grease to needle bearing.
ST 926200000 STAND
CAUTION:
¼ Use a ST to support steering body.
¼ Ensure that needle bearing is free from
defects. If it is faulty, replace steering body
with a new one.
NOTE:
If steering body is removed from vehicle, be sure
to remove rust and clean.
(1) Steering body
B4M2609A
S4M0426A