Atf Cooler Pipe And Hose - Subaru Legacy 2002 Service Manual

Automatic Transmission

20. ATF Cooler Pipe and Hose

S502565
A: REMOVAL
S502565A18
1. EXCEPT 3.0 L MODEL
1) Set the vehicle on a lift.
2) Remove battery and washer tank.
3) Lift-up the vehicle.
4) Remove the under cover.
5) Disconnect ATF cooler hose from radiator.
NOTE:
¼ Do not remove with a screwdriver or other
pointed tools.
¼ When the hose is difficult to remove, wrap a
shop cloth around the hose to protect it. Turn it with
pliers, and then pull directly out with your hand.
6) Disconnect ATF cooler hoses from pipes.
NOTE:
¼ Do not remove with a screwdriver or other
pointed tools.
¼ When the hose is difficult to remove, wrap a
shop cloth around the hose to protect it. Turn it with
pliers, and then pull directly out with your hand.
ATF COOLER PIPE AND HOSE
S502565A1803
B3M2052
B3M2191
AT-50
7) Remove ATF cooler pipe from frame.
8) Remove the oil cooler inlet and outlet pipes.
NOTE:
When removing outlet pipe, be careful not to lose
ball and spring used with retaining screw.
(A) Inlet pipe
(B) Outlet pipe
2. 3.0 L MODEL
S502565A1802
1) Set the vehicle on a lift.
2) Remove battery and washer tank.
3) Lift-up the vehicle.
4) Remove the under cover.
B3M2054
B3M2059B