Subaru Legacy 2002 Service Manual page 1623

Automatic Transmission
10) Remove the oil cooler inlet and outlet pipes.
NOTE:
When removing outlet pipe, be careful not to lose
ball and spring used with retaining screw.
B: INSTALLATION
1. EXCEPT 3.0 L MODEL
1) Install the oil cooler outlet and inlet pipes.
NOTE:
Be sure to use a new aluminum washer.
Tightening torque:
T1: 44 N·m (4.5 kgf-m, 32.5 ft-lb)
T2: 25 N·m (2.5 kgf-m, 18.1 ft-lb)
ATF COOLER PIPE AND HOSE
B3M2059
S502565A11
S502565A1103
B3M2059A
AT-52
2) Install ATF cooler pipe to frame.
3) Connect ATF cooler hose to pipe transmission
side.
NOTE:
¼ Install so that the hose is not folded over, exces-
sively bent, or twisted.
¼ Be careful to insert the hose to the specified
position.
B3M2054
B3M2191