Subaru Legacy 2002 Service Manual page 2191

Brake
¼ RHD model
1) Pull up parking brake lever and block tires.
2) Disconnect ground cable from battery.
3) Remove instrument panel lower cover from
instrument panel.
4) Remove clevis pin which secures brake pedal
to brake booster operating rod. Also disconnect
electrical connectors (for stop light switch, etc.).
(A) Snap pin
(B) Clevis pin
5) Remove nuts and bolts which secure pedal
bracket.
(A) Brake pedal bracket
BRAKE PEDAL
2. AT MODEL
¼ LHD model
1) Pull up parking brake lever.
2) Disconnect ground cable from battery.
3) Remove instrument panel lower cover from
instrument panel.
4) Remove clevis pin which secures brake pedal
to brake booster operating rod. Also disconnect
stop light switch connector.
5) Remove two bolts and four nuts which secure
brake pedal to pedal.
B4M1747A
¼ RHD model
NOTE:
For removal procedures, refer to "MT MODEL".
<Ref. to BR-51, MT MODEL, REMOVAL, Brake
Pedal.>
B4M1748B
BR-52
S405541A1802
G4M0324