Subaru Legacy 2002 Service Manual page 2086

C: CAUTION
S401001A03
¼ Wear working clothing, including a cap, protec-
tive goggles, and protective shoes during opera-
tion.
¼ Remove contamination including dirt and corro-
sion before removal, installation or disassembly.
¼ Keep the disassembled parts in order and pro-
tect them from dust or dirt.
¼ Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary
removal, installation, disassembly, and replace-
ment.
D: PREPARATION TOOL
1. SPECIAL TOOLS
ILLUSTRATION
B2M3876
B2M3877
2. GENERAL PURPOSE TOOLS
TOOL NAME
Circuit Tester
Pressure Gauge
Oscilloscope
GENERAL DESCRIPTION
S401001A17
S401001A1701
TOOL NUMBER
24082AA190 CARTRIDGE
22771AA030 SELECT MONITOR
KIT
S401001A1702
¼ Be careful not to burn your hands, because each
part in the vehicle is hot after running.
¼ Be sure to tighten fasteners including bolts and
nuts to the specified torque.
¼ Place shop jacks or safety stands at the speci-
fied points.
¼ Before disconnecting electrical connectors of
sensors or units, be sure to disconnect ground
cable from battery.
DESCRIPTION
Troubleshooting for electrical systems.
Troubleshooting for electrical systems.
¼ English: 22771AA030 (Without printer)
¼ German: 22771AA070 (Without printer)
¼ French: 22771AA080 (Without printer)
¼ Spanish: 22771AA090 (Without printer)
Used for measuring resistance, voltage and ampere.
Used for measuring oil pressure.
Used for measuring sensor.
ABS-5
REMARKS
REMARKS
ABS