Atf Filter - Subaru Legacy 2002 Service Manual

18. ATF Filter

A: REMOVAL
S502226A18
1. EXCEPT 3.0 L MODEL
NOTE:
The ATF filter is maintenance free.
1) Lift-up the vehicle.
2) Using ST, remove ATF filter.
ST 498545400 OIL FILTER WRENCH
(A) ATF filter
3) Get new ATF filter and apply a thin coat of ATF
to the oil seal.
2. 3.0 L MODEL
S502226A1802
¼ ATF Filter
NOTE:
The ATF filter is maintenance free.
1) Lift-up the vehicle.
2) Remove front left mud guard.
<Ref. to EI-23, REMOVAL, Mud Guard.>
3) Using ST, remove ATF filter.
ST 498548500 OIL FILTER WRENCH
4) Get new ATF filter and apply a thin coat of ATF
to the oil seal
¼ ATF Filter Assembly
1) Remove battery.
2) Lift-up the vehicle.
3) Remove front left mud guard.
<Ref. to EI-23, REMOVAL, Mud Guard.>
ATF FILTER
S502226
S502226A1803
B3M1665B
B3M2049
4) Lower the vehicle.
5) Release clamp of IN, OUT of oil filter hose, and
remove hose from pipe.
NOTE:
¼ Plug the pipe.
¼ Put a mark etc., to distinguish IN, OUT on pipe
and hose.
6) Remove oil filter bracket installation nut.
7) Remove ATF filter assembly.
8) Remove ATF filter with attachment to bracket.
9) Get new ATF filter and apply a thin coat of ATF
to the oil seal.
AT-47
Automatic Transmission
B3M2050
B3M2051