Automatic Transmission Assembly - Subaru Legacy 2002 Service Manual

Automatic Transmission
11) Install ST to torque converter clutch case.
ST 498277200 STOPPER SET
12) Remove ATF level gauge.
NOTE:
Plug opening to prevent entry of foreign particles
into transmission fluid.
13) Set ST.
NOTE:
Also is available Part No. 41099AA010.
ST 41099AA020 ENGINE SUPPORT ASSY

AUTOMATIC TRANSMISSION ASSEMBLY

H2M1961A
S2M0908
G2M0313
14) Remove bolt which holds right upper side of
transmission to engine.
Except 3.0 L model
3.0 L model
15) Lift-up the vehicle.
16) Remove under cover.
17) Remove front, center, rear exhaust pipe and
muffler.
Except 3.0 L model
<Ref. to EX(w/oOBD)-9,
Exhaust Pipe.>,
REMOVAL, Rear Exhaust Pipe.> and <Ref. to
EX(w/oOBD)-14, REMOVAL, Muffler.> or <Ref. to
EX-5, REMOVAL, Front Exhaust Pipe.>, <Ref. to
EX-9, REMOVAL, Rear Exhaust Pipe.> and <Ref.
to EX-10, REMOVAL, Muffler.>
3.0 L model
<Ref. to EX(H6)-5, REMOVAL, Front Exhaust
Pipe.>, <Ref. to EX(H6)-8, REMOVAL, Rear
Exhaust Pipe.> and <Ref. to EX(H6)-9, REMOVAL,
Muffler.>
18) Remove heat shield cover.
AT-20
B3M2044
B3M2045
REMOVAL,
<Ref. to EX(w/oOBD)-13,
B3M1605
Front