Parking Brake
B: INSTALLATION
Install (new) parking brake assembly in the reverse
order of removal.
NOTE:
¼ Be sure to pass cable through cable guide inside
the tunnel.
¼ Be sure to adjust the lever stroke. <Ref. to PB-4,
ADJUSTMENT, Parking Brake Lever.>
PARKING BRAKE CABLE
S404170A11
C: INSPECTION
Check the removed cable and replace if damaged,
rusty, or malfunctioning.
1) Check for smooth operation of the cable.
2) Check the inner cable for damage and rust.
3) Check the outer cable for damage, bends, and
cracks.
4) Check the boot for damage, cracks, and dete-
rioration.
PB-6
S404170A10