Subaru Legacy 2002 Service Manual page 2332

DIAGNOSTICS CHART WITH DIAGNOSIS CONNECTOR
No.
9 CHECK WIRING HARNESS.
Measure resistance between connector (F45)
and chassis ground.
Connector & terminal
(F45) No. G6 — Chassis ground:
10 CHECK POOR CONTACT IN CONNEC-
TORS.
Turn ignition switch to OFF.
Step
Is the resistance less than
0.5 Ω?
Is there poor contact in
connectors between combi-
nation meter and
ABSCM&H/U?
ABS-31
Check Yes
Go to step 10.
Repair connector.
ABS (Diagnostics)
No
Repair harness/
connector.
Replace
ABSCM&H/U.
<Ref. to ABS-6,
ABS Control Mod-
ule and Hydraulic
Control Unit
(ABSCM&H/U).>