Subaru Legacy 2002 Service Manual page 1592

19) Drain ATF to remove ATF drain plug.
(A) Oil pan
(B) Drain plug
20) Disconnect ATF cooler hoses from pipes of
transmission side, and remove ATF level gauge
guide.
21) Remove propeller shaft.
<Ref. to DS-13, REMOVAL, Propeller Shaft.>
22) Remove shift select cable. <Ref. to CS-10,
REMOVAL, Select Cable.>
23) Disconnect stabilizer link from transverse link.
24) Remove bolt securing ball joint of transverse
link to housing.
25) Remove spring pins and separate front drive
shafts from each side of the transmission.
AUTOMATIC TRANSMISSION ASSEMBLY
B3M1036C
B3M2191
S4M0090
26) Remove nuts which hold lower side of trans-
mission to engine.
Except 3.0 L model
3.0 L model
27) Place transmission jack under transmission.
NOTE:
Make sure that the support plates of transmission
jack don't touch the oil pan.
AT-21
Automatic Transmission
G2M0325
B3M2047
B3M2048