Clutch Pedal - Subaru Legacy 2002 Service Manual

10. Clutch Pedal

A: REMOVAL
S504256A18
1. LHD MODEL
S504256A1803
1) Remove steering column. <Ref. to PS-24,
REMOVAL, Tilt Steering Column.>
2) Disconnect connectors from stop light and
clutch switches.
3) Remove snap pins which secure lever to push
rod and operating rod.
4) Remove clevis pins which secure lever to push
rod and operating rod.
(A) Operating rod
(B) Push rod
(C) Snap pin
(D) Clevis pin
5) Remove PHV adjusting nut and lock nut.
(A) Adjusting nut
(B) Lock nut
(C) PHV
CLUTCH PEDAL
S504256
B4M1743A
S4M0241B
CL-27
6) Remove cable clamp, and disconnect PHV
cable from PHV.
NOTE:
Carefully protect boot and inner cable from dam-
age when disconnecting PHV cable.
(A) PHV cable
(B) Clamp
7) Remove nut which secures clutch master cylin-
der.
8) Remove bolts and nuts which secure brake and
clutch pedals, and remove pedal assembly.
2. RHD MODEL
S504256A1804
1) Disconnect ground cable from battery.
2) Disconnect connector from clutch. (With cruise
control)
3) Remove snap pin and clevis pin that join push
rod and clutch pedal.
4) Remove master cylinder mounting nuts.
(A) Master cylinder
Clutch System
S4M0242B
B4M1744
B4M1749B