Subaru Legacy 2002 Service Manual page 1565

Control Systems
5) Remove bushing and cushion rubber from stay.
(A) Bushing
(B) Stay
(C) Cushion rubber
6) Remove O-ring, then disconnect bushing B.
(A) O-ring
(B) O-ring
(C) Bushing B
7) Draw out spring pin, then remove bushing A
from gear shift lever.
(A) Spring pin
(B) Bushing A
MT GEAR SHIFT LEVER
D: ASSEMBLY
1) Clean all parts before assembly.
2) Mount the bushing and cushion rubber on the
stay.
B3M0830D
3) Mount each part; boot, O-ring, bushing A,
spacer, bushing B, bush and spring pin on the gear
shift lever.
NOTE:
¼ Always use new O-rings.
¼ Apply grease [NIGTIGHT LYW No. 2 or equiva-
lent] to the inner and side surfaces of the bushing
when installing the spacer.
B3M0620C
B3M0621B
CS-16
S501236A02
(A) Bushing
(B) Cushion rubber
(A) Boot
(B) O-ring
(C) Bushing
(D) Spacer
(E) Bushing A
(F) Bushing B
(G) Spring pin
(H) O-ring
B3M0830C
B3M0623C