Subaru Legacy 2002 Service Manual page 1563

Control Systems
11) Remove joint and then extract spring pin.
(A) Joint
(B) Spring pin
12) Lower the vehicle.
13) Remove gear shift lever.
B: INSTALLATION
1) Install the joint to the transmission and secure
with the spring pin.
2) Insert gear shift lever from room side.
NOTE:
After inserting rod and stay, temporarily put them
onto transmission mount.
3) Lift-up the vehicle.
MT GEAR SHIFT LEVER
B3M1826A
B3M1827
S501236A11
B3M1827
CS-14
4) Mount cushion rubber on the body.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
(A) Stay
(B) Cushion rubber
5) Connect rod to the joint.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
(A) Stay
(B) Rod
6) Connect stay to transmission bracket.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
(A) Stay
(B) Transmission bracket
B3M1825A
B3M1824A
B3M1823A