10. POWER Indicator Light
Display
S004729
A: INSPECTION
When
any
on-board
malfunctioning, the display on the POWER indica-
tor light blinks from the time the malfunction is
detected after starting the engine until the ignition
switch is turned OFF. The malfunctioning part or
POWER INDICATOR LIGHT DISPLAY
S004729A10
diagnostics
item
unit can be determined by a DTC during on-board
diagnostics operation. Problems which occurred
previously can also be identified through the
memory function. If the POWER indicator does not
show a problem (although a problem is occurring),
is
the problem can be determined by checking the
performance characteristics of each sensor using
the select monitor. Indicator signal is as shown in
the figure.
AT-25
Automatic Transmission (Diagnostics)
S3M0062F