Subaru Legacy 2002 Service Manual page 1979

Hide thumbs Also See for Legacy 2002:

Table of Contents

GENERAL DESCRIPTION

Differentials

¼ Wear working clothing, including a cap, protec-

tive goggles, and protective shoes during opera-

¼ Remove contamination including dirt and corro-

sion before removal, installation or disassembly.

¼ Keep the disassembled parts in order and pro-

tect them from dust or dirt.

¼ Before removal, installation or disassembly, be

sure to clarify the failure. Avoid unnecessary

removal, installation, disassembly, and replace-

¼ Be careful not to burn your hands, because each

part on the vehicle is hot after running.

¼ Use SUBARU genuine gear oil, grease etc. or

the equivalent. Do not mix gear oil, grease etc. with

that of another grade or from other manufacturers.

¼ Be sure to tighten fasteners including bolts and

nuts to the specified torque.

¼ Place shop jacks or safety stands at the speci-

fied points.

¼ Apply gear oil onto sliding or revolution surfaces

before installation.

¼ Before installing O-rings or snap rings, apply

sufficient amount of gear oil to avoid damage and

deformation.

¼ Before securing a part on a vise, place cushion-

ing material such as wood blocks, aluminum plate,

or shop cloth between the part and the vise.

¼ Avoid damaging the mating face of the case.

Chapters

Table of Contents