Subaru Legacy 2002 Service Manual page 1676

C: DISASSEMBLY
1) Using ST, remove roller bearing (extension
case side).
ST 498077000 REMOVER
(A) Roller bearing
2) Using ST1 and ST2, remove roller bearing
(transfer case side).
ST1 498077000 REMOVER
ST2 899864100 REMOVER
(A) Roller bearing
TRANSFER DRIVEN GEAR
S503223A06
B3M2136A
B3M2137A
MT-51
Manual Transmission and Differential
D: ASSEMBLY
S503223A02
1) Using ST, install roller bearing (extension case
side).
ST1 398177700 INSTALLER
ST2 899864100 REMOVER
CAUTION:
Do not apply pressure in excess of 10 kN (1 ton,
1.1 US ton, 1.0 Imp ton)
(A) Roller bearing
2) Using ST, install roller bearing (transfer case
side).
ST 499757002 INSTALLER
CAUTION:
Do not apply pressure in excess of 10 kN (1 ton,
1.1 US ton, 1.0 Imp ton)
(A) Roller bearing
E: INSPECTION
1) Bearings
Replace bearings in the following cases:
¼ Broken or rusty bearings
¼ Worn or damaged
¼ Bearings that fail to turn smoothly or make
abnormal noise when turned after gear oil lubrica-
tion.
2) Driven gear
Replace drive gear in the following cases:
¼ If their tooth surfaces and shaft are excessively
broken or damaged.
B3M2138A
B3M2139A
S503223A10