Subaru Legacy 2002 Service Manual page 1674

Hide thumbs Also See for Legacy 2002:

Table of Contents

E: INSPECTION

Replace bearings in the following cases:

¼ Broken or rusty bearings

¼ Worn or damaged

¼ Bearings that fail to turn smoothly or make

abnormal noise when turned after gear oil lubrica-

2) Drive gear

Replace drive gear in the following cases:

¼ If their tooth surfaces and shaft are excessively

broken or damaged.

3) Measure clearance between snap ring and

inner race of ball bearing with a thickness gauge.

0.01 — 0.15 mm (0.0004 — 0.0059 in)

If the measurement is not within the specification,

select suitable snap ring.

TRANSFER DRIVE GEAR

Thickness mm (in)

1.53 (0.0602)

1.65 (0.0650)

1.77 (0.697)

Manual Transmission and Differential

Chapters

Table of Contents