Preparation For Overhaul - Subaru Legacy 2002 Service Manual

PREPARATION FOR OVERHAUL

Manual Transmission and Differential
8. Preparation for Overhaul
S503091
A: PROCEDURE
S503091E45
1) Clean oil, grease, dirt and dust from transmis-
sion.
2) Remove drain plug to drain oil. After draining,
retighten it as before.
NOTE:
Replace gasket with a new one.
Tightening torque:
44 N·m (4.5 kgf-m, 32.5 ft-lb)
B3M0037
3) Attach transmission to ST.
ST 499937100 TRANSMISSION STAND SET
G3M0517
4) Rotating parts should be coated with oil prior to
assembly.
5) All disassembled parts, if to be reused, should
be reinstalled in the original positions and direc-
tions.
6) Gaskets, lock washers and lock nut must be
replaced with new ones.
7) Liquid gasket should be used where specified
to prevent leakage.
MT-43