Switches And Harness - Subaru Legacy 2002 Service Manual

Manual Transmission and Differential

6. Switches and Harness

A: REMOVAL
S503232A18
1. BACK-UP LIGHT AND NEUTRAL
POSITION SWITCH
1) Disconnect connector battery ground cable.
2) Remove air intake duct and cleaner case. <Ref.
to IN-6, REMOVAL, Air Cleaner Case.> and <Ref.
to IN-7, REMOVAL, Air Intake Duct.>
3) Disconnect connector back-up light switch and
neutral position switch.
(A) Neutral switch (Brown)
(B) Back-up light switch (Gray)
4) Lift-up the vehicle.
5) Remove back-up light switch and neutral posi-
tion switch with harness.
(A) Neutral switch (Brown connector)
(B) Back-up light switch (Gray connector)
SWITCHES AND HARNESS
S503232
S503232A1801
B2M0337B
B3M1372C
2. HIGH-LOW SWITCH
1) Disconnect connector battery ground cable.
2) Remove air intake duct and cleaner case. <Ref.
to IN-6, REMOVAL, Air Cleaner Case.> and <Ref.
to IN-7, REMOVAL, Air Intake Duct.>
3) Disconnect connector high-low switch.
(A) Neutral switch (Brown)
(B) Back-up light switch (Gray)
(C) High-low switch (Black)
4) Remove HI-LO switch cable from clamp.
5) Remove HI-LO switch.
(A) Clamp
(B) High-low switch
MT-40
S503232A1802
S2M0743A
B3M2128A