Subaru Legacy 2002 Service Manual page 2097

ABS
8) When inspecting rear tone wheel, remove rear
drive shaft as rear tone wheel is unitized with BJ
assembly of rear drive shaft.
<Ref. to DS-31, REMOVAL, Rear Drive Shaft.>
CAUTION:
¼ Be careful not to damage pole piece located
at tip of the sensor and teeth faces during
removal.
¼ Do not pull sensor harness during removal.
REAR ABS SENSOR
B: INSTALLATION
1) Install rear drive shaft to the vehicle.
<Ref. to DS-31, INSTALLATION, Rear Drive
Shaft.>
2) Temporarily install rear ABS sensor on rear
arm.
CAUTION:
Be careful not to strike ABS sensor's pole
piece and tone wheel's teeth against adjacent
metal parts during installation.
3) Install rear sensor harness brackets in the origi-
nal positions and install harness on the clip.
Tightening torque:
32 N·m (3.3 kgf-m, 24 ft-lb)
ABS-16
S401185A11
B4M2063
B4M1763
B4M1791