Subaru Legacy 2002 Service Manual page 1920

Camber is increased.
Camber is decreased.
3) Tighten the two self-locking nuts.
Tightening torque:
175 N·m (17.8 kgf-m, 129 ft-lb)
WHEEL ALIGNMENT
Left side
Rotate counterclock-
wise.
B4M0190
Rotate clockwise.
B4M0350
3. CASTER
¼ Inspection
1) Place front wheel on turning radius gauge.
Make sure ground contacting surfaces of front and
rear wheels are set at the same height.
2) Set ST into the center of the wheel, and then
install the wheel alignment gauge.
ST 927380002 ADAPTER
3) Follow the wheel alignment gauge operation
manual to measure the caster angle.
NOTE:
Refer to the "SPECIFICATIONS" for the caster val-
ues. <Ref. to FS-2, SPECIFICATIONS, General
Description.>
FS-9
Right side
B4M0350
B4M0190
S202116A1003
(1) Alignment gauge
(2) Turning radius gauge
Front Suspension
Rotate clockwise.
Rotate counterclock-
wise.
B4M0567B