Clutch Disc And Cover - Subaru Legacy 2002 Service Manual

Clutch System

2. Clutch Disc and Cover

A: REMOVAL
S504252A18
1. EUROPE AND AUSTRALIA MODELS
S504252A1803
1) Remove transmission assembly from vehicle
body. <Ref. to MT-31, REMOVAL, Manual Trans-
mission Assembly.>
2) Insert ST on flywheel.
ST 499747100 CLUTCH DISC GUIDE
(A) Double mass flywheel
3) Remove clutch cover and clutch disc.
NOTE:
¼ Take care not to allow oil on the clutch disc fac-
ing.
¼ Do not disassemble either clutch cover or clutch
disc.
¼ Put matching marks to flywheel and clutch cover
before removing clutch cover.
CLUTCH DISC AND COVER
2. EXCEPT EUROPE AND AUSTRALIA
S504252
MODELS
1) Remove transmission assembly from vehicle
body. <Ref. to MT-31, REMOVAL, Manual Trans-
mission Assembly.>
2) Install ST on flywheel.
ST 499747100 CRANKSHAFT STOPPER
3) Remove clutch cover and clutch disc.
B2M3345B
NOTE:
¼ Take care not to allow oil on the clutch disc fac-
ing.
¼ Do not disassemble either clutch cover or clutch
disc.
B: INSTALLATION
1. EUROPE AND AUSTRALIA MODELS
1) Insert ST into the clutch disc and install them on
the flywheel by inserting the ST end into the pilot
bearing.
NOTE:
When installing clutch disc, be careful its direction.
ST 499747100 CLUTCH DISC GUIDE
B2M3346
CL-12
S504252A1804
(A) Clutch cover
S504252A1103
(A) Flywheel
(B) Flywheel side
S2M1847A
S504252A11
B2M4687A