Subaru Legacy 2002 Service Manual page 1710

4) Straighten lock nut at staked portion. Remove
the lock nut using ST1 and ST2.
ST1 499987300 SOCKET WRENCH (50)
ST2 899884100 HOLDER
5) Remove 5th driven gear using ST.
ST 499857000 5TH DRIVEN GEAR
REMOVER
6) Remove woodruff key.
7) Remove roller bearing, 3rd-4th driven gear
using ST1 and ST2.
ST1 499757002 INSTALLER
ST2 899714110 REMOVER
8) Remove the key.
DRIVE PINION SHAFT ASSEMBLY
G3M0608
G3M0609
G3M0610
MT-85
Manual Transmission and Differential
9) Remove 2nd driven gear, inner baulk ring, syn-
chro cone and outer baulk ring.
(A) 2nd driven gear
(B) Inner baulk ring
(C) Synchro cone
(D) Outer baulk ring
10) Remove 1st driven gear, 2nd gear bushing,
gear and hub using ST1 and ST2.
NOTE:
Replace gear and hub if necessary. Do not attempt
to disassemble if at all possible because they must
engage at a specified point. If they have to be
disassembled, mark the engaging point before-
hand.
ST1 499757002 INSTALLER
ST2 899714110 REMOVER
11) Remove sub gear for 1st driven gear.
S3M0445A
G3M0611