Subaru Legacy 2002 Service Manual page 1622

5) Disconnect ATF cooler hose from radiator.
NOTE:
¼ Do not remove with a screwdriver or other
pointed tools.
¼ When the hose is difficult to remove, wrap a
shop cloth around the hose to protect it. Turn it with
pliers, and then pull directly out with your hand.
6) Disconnect ATF cooler hoses from transmis-
sion.
NOTE:
¼ Do not remove with a screwdriver or other
pointed tools.
¼ When the hose is difficult to remove, wrap a
shop cloth around the hose to protect it. Turn it with
pliers, and then pull directly out with your hand.
7) Remove front left mud guard.
<Ref. to EI-23, REMOVAL, Mud Guard.>
ATF COOLER PIPE AND HOSE
B3M2055
B3M2191
AT-51
8) Disconnect ATF cooler hoses from ATF filter.
NOTE:
¼ Do not remove with a screwdriver or other
pointed tools.
¼ When the hose is difficult to remove, wrap a
shop cloth around the hose to protect it. Turn it with
pliers, and then pull directly out with your hand.
9) Remove AT cooler pipe from frame.
Automatic Transmission
B3M2057
B3M2058