Subaru Legacy 2002 Service Manual page 1761

Clutch System
5) Remove PHV adjusting nut and lock nut.
(A) Adjusting nut
(B) Lock nut
(C) PHV
6) Remove cable clamp and disconnect PHV
cable from PHV.
NOTE:
Carefully protect boot and inner cable from dam-
age when disconnecting PHV cable.
(A) PHV cable
(B) Clamp
7) Remove clutch pedal and bracket as a unit.
(A) Clutch pedal bracket
(B) Clutch pedal
CLUTCH PEDAL
B: INSTALLATION
1) Install in the reverse order of removal.
NOTE:
¼ If cable clamp is damaged, replace it with a new
one.
¼ Never fail to cover outer cable end with boot.
¼ Be careful not to kink accelerator cable.
¼ Always use new clevis pins.
2) Adjustment of clutch pedal and adjustment after
pedal installation. <Ref. to CL-31, ADJUSTMENT,
S4M0241B
Clutch Pedal.>
3) Adjust
ADJUSTMENT, Hill Holder.>
C: DISASSEMBLY
1. LHD MODEL
1) Remove clutch switches.
2) Remove clips, assist spring, rod and bushing.
S4M0242B
(A)
(B)
(C)
(D)
(E)
3) Remove spring pin and lever.
B4M1752B
(A)
(B)
CL-28
S504256A11
hill holder. <Ref.
S504256A06
S504256A0601
Clip
Assist spring
Assist rod
Bushing
Clevis pin
Pin
Lever
to BR-50,
B2M4115A
B2M4116A