Manual Transmission and Differential
C: INSPECTION
1) After installing snap ring, measure clearance
between snap ring and counter washer.
Clearance:
0.05 — 0.35 mm (0.0020 — 0.0138 in)
2) If the clearance is out of measured value, select
a snap ring and install to put clearance within mea-
sured value. <Ref. to MT-105, ADJUSTMENT,
Counter Gear.>
D: ADJUSTMENT
Selection of snap ring
If the measurement is not with in the specification,
select suitable snap ring.
Snap ring
Part No.
031319000
805019010
COUNTER GEAR
S503716A10
S503716A01
Thickness mm (in)
1.50 (0.0591)
1.72 (0.0677)
MT-106