Subaru Legacy 2002 Service Manual page 2267

Power Assisted System (Power Steering)
11) Using ST, clinch steering body cylinder at a
point less than 3 mm (0.12 in) from holder.
CAUTION:
Be careful not to deform holder.
ST 34099FA060 PUNCH HOLDER
12) Roll vinyl tape on serration part of valve
assembly, and apply grease on tape surface.
(1) Vinyl tape
13) Apply grease on gear teeth of valve assembly
and attach valve assembly.
CAUTION:
¼ Be careful not to scratch oil seal on valve
gear teeth.
¼ Be careful not to scratch seal ring of valve
circumference.
STEERING GEARBOX [RHD MODEL]
S4M0434B
B4M2610A
PS-58
(1) Seal ring
(2) Oil seal
14) Apply grease on oil seal circumference, press
in to plug using ST and a press. Replace plug cir-
cumference O-rings with new ones.
ST 34199AE110 PLUG OIL SEAL INSTALLER
CAUTION:
Pay attention to oil seal direction, and attach-
ing position.
(1) Plug
(2) O-ring
(3) Oil seal
B4M2611A
B4M2612A