Show Boot System - Dell S4810 Reference Manual

Example
Dell#restore factory-defaults stack-unit all nvram
(NvRAM all
**************************************************************
* Warning - Restoring factory defaults will delete the
stack units)
existing *
* persistent settings (stacking, fanout, etc.) *
* All the units in the stack will be split into standalone
units. *
* After restoration the unit(s) will be powercycled
immediately. *
* Proceed with caution ! *
**************************************************************
Proceed with factory settings? Confirm [yes/no]:yes
-- Restore status --
Unit Nvram
------------------------
0
1
2
3
4
5
Power-cycling the unit(s).
Dell#
Example
Dell#restore factory-defaults stack-unit 1nvram
(NvRAM, single
**************************************************************
* Warning - Restoring factory defaults will delete the
unit)
existing *
* persistent settings (stacking, fanout, etc.) *
* After restoration the unit(s) will be powercycled
immediately. *
* Proceed with caution ! *
**************************************************************
Proceed with factory settings? Confirm [yes/no]:yes
-- Restore status --
Unit Nvram
------------------------
1
Power-cycling the unit(s).
Dell#

show boot system

Displays information about boot images currently configured on the system.
S4810
Syntax
show boot system {stack-unit {0-11 | 0-7 | 0-5 | all}}
Parameters
all
stack-unit
74
Config
Success
Success
Success
Not present
Not present
Not present
Config
Success
Enter the keyword all to display the boot image information
for all line cards and rpms.
Enter the keyword stack-unit followed by a number to
display boot image information for a stack-unit.
The S4810 range is from 0 to 11.
File Management