12.17.14 Forwarding Access Setting-Password; 12.17.15 Forwarding Access Setting-Url; 12.17.16 Forwarding Access Setting-Filename; 12.17.17 Download - Konica Minolta bizhub C360 Service Manual

12. SERVICE MODE

12.17.14 Forwarding Access Setting-Password

A. Use
• To register the password for accessing the program server where firmware is to be
stored.
B. Procedure
1. Select [Password].
2. Enter the password (up to 64 characters) on the on-screen keyboard.

12.17.15 Forwarding Access Setting-URL

A. Use
• To register the address and directory of the program server where the firmware is to be
stored in URL.
B. Procedure
1. Select [URL].
2. Enter the URL (up to 256 one-byte characters) on the on-screen keyboard.
NOTE
• Enter the URL which format suits the protocol to be used.
When connecting to http http:// (Host name or IP address)/ directory name or
https:// (Host name or IP address)/directory name.
When connecting to ftp ftp:// (Host name or IP address) / directory name.

12.17.16 Forwarding Access Setting-FileName

A. Use
• To register the file name of the firmware data to be downloaded.
B. Procedure
1. Select [FileName].
2. Enter the file name (up to 63 one-byte characters) on the on-screen keyboard.

12.17.17 Download

A. Use
• Access the program server according to the Internet ISW setting, and download the firm-
ware.
• To use when updating the firmware via network.
B. Procedure
1. Select [Download].
2. Touch [ISW Start] to start downloading the firmware.
3. The message to show the status will be displayed on the screen while connecting and
transferring data.
NOTE
• When it failed to connect to the program server, or failed to download, the error
code and the message will be displayed. Check the cause of the error by the error
code, and follow the message for resetting.
Refer to "Error cord list" for the error codes.
See P.159
• When the firmware is normally upgraded, the main body will automatically be restarted to
complete the Internet ISW.
508
Field Service Ver. 2.1 Feb. 2012