Field Service Ver. 2.1 Feb. 2012
12.13.3
Halftone Pattern
A. Use
• To produce a solid halftone pattern.
• Used for checking uneven density and pitch noise.
<Test pattern>
B. Procedure
• # of Print ("1" to 999)
• Select "SINGLE" (single copy) or MULTI (multi copy).
• Select FEET or "HYPER."
• Select "Gradation", Resolution or Error diffusion if HYPER has been selected.
• Select "1-Sided", 2-Side1 or 2-Side2.
2-Side1: The same pattern is printed on both front and back sides.
2-Side2: The front side is blank and the pattern is printed on the back side.
• Select the color mode.
"Cyan", Magenta, Yellow, Black (4PC), Red, Green, Blue, CMYK, 3 Color,
4 Color, Black (1PC), MIX
• Select a printable area from [Full Bleed] or [Front Half].
NOTE
• [Front Half] is selectable only for one-side printing.
• Type the density level (0 to "255").
12. SERVICE MODE
SINGLE
HYPER
Gradation
Cyan
Density: 128
A0P0F3C519DA
481