Sleep On/Off Choice Setting; Foolscap Size Setting; Original Size Detection - Konica Minolta bizhub C360 Service Manual

12. SERVICE MODE
12.8.4

Sleep ON/OFF Choice Setting

2
A. Use
• To display the option of "OFF" for the sleep mode setting screen available from adminis-
trator settings.
NOTE
• The sleep mode will begin in 48 hours even if it sets it to "OFF."
B. Procedure
• The default setting is Prohibit.
12.8.5

Foolscap Size Setting

A. Use
• To set the size for foolscap paper.
• Upon setup.
B. Procedure
• Select the size from among the following five.
8 / x 13 /
1 1
2 2
12.8.6

Original Size Detection

A. Use
• To change the document size detection table.
• Use to change the setting for the document size detection table.
Copy Glass : To change the size detection table for the document glass.
8 / x 14/Foolscap Size Detection
1
2
B. Procedure
<Copy Glass>
• The default setting is Table1.
NOTE
• Table 2 can be set only when original size detection sensor 2 is being mounted.
<81/2 x 14/Foolscap Size Detection>
• The default setting is 8
432
2
Permit
220 x 330 mm
: To set whether paper of 8
in original glass or ADF size detection.
When Table 1 is selected in Copy Glass, paper of 8
detected as foolscap despite of the setting of 8
Detection.
"Table1"
/ x 14.
1
2
"8 / x 14"
1
2
Field Service Ver. 2.1 Feb. 2012
"Prohibit"
8 / x 13 8 / x 13
1 1
2 4
/ x 13 / size is detected as 8
1 1
2 2
Table2
Foolscap
8 / x 13 / 8 x 13
1 1
8 4
/ x 14 or foolscap
1
2
/ x 13 / size is
1 1
2 2
/ x 14/Foolscap Size
1
2