Konica Minolta bizhub C360 Service Manual page 347

10. UTILITY
(10) SSL Setting
<Use>
• To set whether or not to use SSL when sending an e-mail.
<Procedure>
• The default setting is OFF.
SMTP over SSL
(11) Port No.
<Use>
• To set the port number for transmission with SMTP server.
<Procedure>
1. Touch [Input].
2. Press the Clear key.
3. Enter the port number between 1 and 65535 using the 10-key pad.
(12) Port Number (SSL)
<Use>
• To set the port number when using SSL.
<Procedure>
1. Touch [Input].
2. Touch the Clear key.
3. Enter the port number (SSL) between 1 and 65535 using the 10-key pad.
(13) Certificate Verification Level Settings
<Use>
• To verify the server certificate, configure settings to verify the certificate.
<Procedure>
Expiration Date
Key Usage
Chain
Expiration Date Confirmation : Select whether to check that the server certificate is
CN
292
Start TLS
: Select whether to check that the server certificate is
within the validity period.
: Select whether to check that the server certificate is
used according to the purpose approved by the issuer.
: Select whether to check that the server certificate chain
(certification path) is correct.
The chain is validated by referencing the external certif-
icates managed on this machine.
within the validity period.
The OCSP service and CRL (Certificate Revocation
List) are checked in this order when the expiration date
of the certificate is checked.
: Select whether to check that the CN of the server certif-
icate matches the server address.
Field Service Ver. 2.1 Feb. 2012
"OFF"