Forwarding Access Setting - Konica Minolta bizhub C353 Service Manual

10. Service Mode
D. Connection Setting
Functions • To set the port No. and the time for timeout when accessing the FTP server, and also
to set whether or not to enable PASV mode.
Use • To use when accessing the FTP server.
• To use when connecting by the PASV (passive) mode (FTP server side will inform the
connection port before connecting).
Setting/ <Port Number>
Procedure • Enter the value between 1 and 65535 using the 10-key pad.
<Connection Time Out>
• Enter the value between 1 and 60 (min.) using the 10-key pad.
<PASV Mode>
• The default setting is OFF.
10.17.4

Forwarding Access Setting

A. User ID
Functions
• To register the user ID for accessing the program server where firmware is to be
stored.
Use
Setting/ 1. Select [User ID].
Procedure 2. Enter the user ID (up to 64 one-byte characters) on the on-screen keyboard.
B. Password
Functions
• To register the password for accessing the program server where firmware is to be
stored.
Use
Setting/ 1. Select [Password].
Procedure 2. Enter the password (up to 64 characters) on the on-screen keyboard.
C. URL
Functions
• To register the address and directory of the program server where the firmware is to
be stored in URL.
Use
Setting/ 1. Select [URL].
Procedure 2. Enter the URL (up to 256 one-byte characters) on the on-screen keyboard.
NOTE
• Enter the URL which format suits the protocol to be used.
When connecting to http http:// (Host name or IP address)/ directory name or
https:// (Host name or IP address)/directory name.
When connecting to ftp ftp:// (Host name or IP address) / directory name.
D. FileName
Functions
• To register the file name of the firmware data to be downloaded.
Use
Setting/ 1. Select [FileName].
Procedure 2. Enter the file name (up to 63 one-byte characters) on the on-screen keyboard.
434
ON
Field Service Ver. 3.0 Jan. 2008
"OFF"