Konica Minolta bizhub C360 Service Manual page 596

Field Service Ver. 2.1 Feb. 2012
JAM
JAM type
code
⎯
Vertical trans-
port section
⎯
20-11
20-12
20-13
20-21
20-22
30-01 2nd image
transfer
section
30-03
⎯
⎯
⎯
Detection timing
• Rise timing of load for registration is ear-
lier than the one for making the loop at
front of the timing roller at tray 4 paper
feed.
• Rise timing of load for registration is ear-
lier than the one for making the loop at
front of the timing roller at LCT paper feed.
• The paper feed tray 2 vertical transport
sensor (PS19) is not unblocked even after
the lapse of a given period of time after
the paper has been blocked the PS19.
• The tray3 vertical transport sensor
(PS117) is not unblocked even after the
lapse of a given period of time after PS117
has been blocked by a paper.
• The tray4 vertical transport sensor
(PS126) is not unblocked even after the
lapse of a given period of time after PS126
has been blocked by a paper.
• The paper feed tray 2 vertical transport
sensor (PS19) is not blocked even after
the lapse of a given period of time after
the tray3 vertical transport sensor (PS117)
has been blocked by a paper.
• The tray3 vertical transport sensor
(PS117) is not blocked even after the
lapse of a given period of time after the
tray4 vertical transport sensor (PS126)
has been blocked by a paper.
• A sheet of paper does not block the sen-
sor in front of tim. roller (PS1) after a pre-
determined period of time has elapsed
since the sheet unblocks PS1.
• The leading edge of paper does not
unblock the paper exit sensor (PS3) since
the paper feeding is started.
• The sensor in front of tim. roller (PS1) is
unblocked when the main power switch is
turned ON, a door or cover is opened and
closed, or a misfeed or malfunction is
reset.
• The paper exit sensor (PS3) is turned ON
when the main power switch is turned ON,
a door or cover is opened and closed, or a
misfeed or malfunction is reset.
• In case paper position is detected as
locating properly after main power switch
is turned ON, door and cover are opened /
closed or jam/trouble reset is done, it is
regarded as paper jam at 2nd image
transfer section.
17. JAM DISPLAY
Misfeed processing Ref.
location page
Right door P.556
P.557
P.557
P.556
P.556
P.556
P.556
P.558
541