Konica Minolta bizhub C360 Service Manual page 218

Field Service Ver. 2.1 Feb. 2012
[1]
[1]
[2]
A0EDF2C525DA
[2]
A0EDF2C526DA
[1]
A0EDF2C248DA
8. COMMERCIALLY AVAILABLE PARTS
4. Remove the harness for the key
counter from three wire saddles [1].
5. Mount the scanner right cover [1],
and insert the harness for the key
counter through the hole [2] knock-
outs were removed from.
6. Using two screws [2], secure the
counter mounting bracket [1].
NOTE
• Secure the counter mounting
bracket passing the connector into
the bracket.
• Use the two long screws
(V116 0418 14: M4 x 18) in the key
counter kit to secure the counter
mounting bracket.
163