12. SERVICE MODE
12.8.12
Post card transfer table
A. Use
• This setting allows you to select the transfer table to be used for thick3 postcards.
• For the use of thick 3 postcards, you can select the transfer table suitable for postcards.
• This setting is used to improve transfer performance to postcards.
Post.
: The postcard 2nd image transfer table is used when printing on thick3 post-
cards.
Thick 3 : The normal thick3 2nd image transfer table is used when printing on thick 3
postcards.
B. Procedure
• The default setting is Thick 3.
12.8.13
Change Warm Up time
A. Use
• To change warm up completion time.
• Mode is changed to Mode 2 in case the paper gets curled significantly when black print-
ing is conducted immediately after warm up at mode 1.
• Mode is changed to Mode 3 or 4 in case the paper gets curled immediately after normal
warm up or the curled paper causes paper jam, paper exit failure, punch/staple/fold posi-
tion failure or etc.
B. Procedure
• The default setting is Mode1.
"Mode1"
436
Post.
Mode2
Field Service Ver. 2.1 Feb. 2012
"Thick 3"
Mode3
Mode4