Network Settings-Ldap Settings - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
G. WINS Settings: Automatic Retrieval Settings
(1) Use
• To set whether or not to enable the auto obtaining of the WINS server address.
• To acquire the WINS server address automatically.
• To obtain the WINS server address from DHCP server. If there are more than on address
settings, up to two can be acquired.
(2) Procedure
• The default setting is Enable.
H. WINS Settings: WINS Server Address 1, 2
(1) Use
• To set the WINS server address.
• To use when manually entering the WINS server address.
• The primary address and the secondary address can be set.
(The primary address has the priority during operation.)
(2) Procedure
• Touch [1] or [2].
• Enter the WINS server address.
I. WINS Settings: Node Type Setting
(1) Use
• To set a node type.
(2) Procedure
• The default setting is H Node.
B Node
J. Direct Hosting Setting
(1) Use
• To set whether or not to enable the direct hosting setting.
(2) Procedure
• The default setting is ON.
10.6.41

Network Settings-LDAP Settings

• It will not be displayed when the following setting shows that authentication device is
mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
A. Enabling LDAP
(1) Use
• To set whether to enable or disable the LDAP function.
(2) Procedure
• The default setting is OFF.
"Enable"
P Node
"ON"
ON
No Limit
N Node "H Node"
OFF
"OFF"
10. UTILITY
285