12.12.16 Color Regist; 12.12.17 Adjustment Data List; 12.13 Test Mode; Procedure For Test Pattern Output - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012

12.12.16 Color Regist

A. Use
• To check each of C, M, and Y for color shift amount.
• The data is updated after a color shift correction has been made or color shift adjustment
has been completed.
• To display the results of skew adjustment.
B. Procedure
• For each of C, M, and Y, the color shift amount (in X and Y directions) at two locations
(one at the front and the other in the rear) and the difference in color shift amount
between the front and rear (X and Y directions) are displayed.
• Display unit: dots
• Individual color shifts of C, M, and Y are based on K and their amounts are displayed.
• For details of skew adjustment, see the following.
See P.386

12.12.17 Adjustment Data List

A. Use
• To display the adjustment and setting value set in the main body.
• Use to check the adjustment and setting value set in the main body.

12.13 Test Mode

• To check the image on the printer side by letting the machine produce various types of
test pattern. It also tests the printing operation in Paper Passage Test, as well as the fax
2
transmission.
• The machine searches through the paper sources in the order of tray 2, tray 3, tray 4,
LCT and tray 1 for paper of the maximum size for printing.
12.13.1

Procedure for test pattern output

1. Touch [Test Mode] to display the test mode menu.
2. Touch the desired test pattern key.
3. Set up the desired functions and press the Start key.
12. SERVICE MODE
479
2