10. UTILITY
(18) Domain Name
<Use>
• To set the domain name for connecting to LDAP server.
<Procedure>
1. Touch [Domain Name].
2. Enter the domain name (up to 64 characters) on the on-screen keyboard, and touch
[OK].
C. Default LDAP Server Setting
(1) Use
• To set the server to be used as the default when searching LDAP.
(2) Procedure
1. Touch [Default LDAP Server Setting].
2. Select the optional server.
10.6.42
Network Settings-E-mail Settings
• It will not be displayed when the following setting shows that authentication device is
mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
A. E-mail TX (SMTP)
(1) E-mail TX (SMTP)
<Use>
• To set whether to enable or disable the e-mail transmission setting.
<Procedure>
• The default setting is ON.
(2) Scan to E-mail
<Use>
• To set whether or not to transfer scanned data by e-mail.
<Procedure>
• The default setting is ON.
(3) Status Notification
<Use>
• To set whether or not to inform the status by e-mail.
<Procedure>
• The default setting is ON.
290
"ON"
"ON"
"ON"
Field Service Ver. 2.1 Feb. 2012
OFF
OFF
OFF