Network Settings-Tcp Socket Settings - Konica Minolta bizhub C360 Service Manual

10. UTILITY
10.6.46

Network Settings-TCP Socket Settings

A. TCP Socket
(1) Use
• To set whether or not to set the TCP socket.
• To set the port number for TCP socket transmission.
(2) Procedure
<TCP Socket>
• The default setting is ON.
<Port Number>
1. Touch the Clear key.
2. Enter the port number between 1 and 65535 using the 10-key pad.
• When SSL Certificate is registered, the following can be set.
<SSL Setting>
• The default setting is OFF.
<Port Number>
1. Touch [Enter].
2. Press Clear key.
3. Enter a port number within the range between 1 and 65535 with the 10-key pad.
<Port Number (SSL)>
1. Touch [Enter].
2. Press Clear key.
3. Enter a port number within the range between 1 and 65535 with the 10-key pad.
B. TCP Socket (ASCII Mode)
(1) Use
• To set whether or not to set the TCP socket for ASCII mode.
• To set the port number which is used for TCP socket transmission by ASCII mode.
(2) Procedure
<TCP Socket/ASCII Mode>
• The default setting is ON.
<Port Number (ASCII Mode)>
1. Touch the Clear key.
2. Enter the port number between 1 and 65535 using the 10-key pad.
302
"ON"
ON
"ON"
Field Service Ver. 2.1 Feb. 2012
OFF
"OFF"
OFF